| Fluid medium |
Clean air (JIS B 8392-1, 1.1.1~1.6.2), and nitrogen gas |
| Operating pressure range |
-0.09~0.2 MPa |
| Guaranteed proof pressure |
0.3 MPa |
| Ambient temp. and humidity |
0~50ºC, max. 80%RH |
| Working fluid temp. |
0~50ºC (No dew condensation) |
■Tube diameter (Tube Fitting )
| MM size (mm) |
ø1.8, ø2, ø3, ø4 |
■Tube diameter (Barb Fitting )
| Applicable Tube O.D.×I.D.(mm) |
ø6xø4 |
■Applicable Fitting size
■Thread size
| Metric internal thread |
M5x0.8 |
Best suitable for suction lift verification of small work piece.
- Ultra-small and light weightWidth：8.5mm, Height：24mm, Length：41mm
Weight ：10.7g (for ø4mm push-in fitting)
- Best suitable for suction lift verification.Non-linear type sensor suitable for suction lift verification.
⇒Example
・Suction lift verification of small work piece, which is hard to detect by pressure sensor.
・Verification for which the piping is long and hard to detect by pressure sensor.
・When vacuum flow is narrowed in order to secure pressure difference and the tact time to suction lift verification becomes longer.
- A wide variety of connection method is available.The connection methods of ①~④ are lined up. upped. On top of it, fitting combination for connection configuration are available.
- Three types of installation method are available.
- Bidirectional flow measurement type, best suitable for suction transportation, is available.Bidirectional type enables suction lift and release verification. Thus, best suitable for suction transport application.
